 |
 |
Jet Nozzles
Line Moles
Line Mole (LM) (Aluminum)
Design to be light weight yet heavy duty these 10K line moles are manufactured from aircraft grade aluminum, Lukecon® anodized and will accept the standard steel or carbide high pressure fittings.
| APC Part Number | Female Pipe Thread (NPT) | Outside Diameter | Insert Size |
| AP0500ALM-07 | 1/2x14 | 2.000 | 0.1250 |
| AP0500AML-07 | 1/2x14 | 2.000 | 0.1250 |
| AP1003ALM-13 | 1x11.5 | 3.000 | 0.2500 |
| AP1003ALM-16 | 1x11.5 | 3.000 | 0.2500 |
Maximum Working Pressure = 10,000psi (1379 bar)
Application Features
- Lightweight
- Clean large diameter pipes.
Insert Line Mole
Nozzle ports can be populated with blank plugs or drilled inserts to create an orifice pattern conducive to the job at hand.
| APC Part Num. | Orifice Config. | Insert Size | Body Dia. | Body Length | NPT Female | NPT Male |
| AP0500IM-16 | 6A0-6B45 | 0.2500 | 2.000 | 3.000 | 1/2x14 | 1x11.5 |
Maximum Working Pressure = 10,000psi (1379 bar)
Application Features
- Designed to be used in-line with other Line Moles
Line Moles (10K)
Line moles are available in several sizes and orifice configurations.
| APC Part Number | Orifice Configuration | Insert Size | Body Dia. | Body Length | NPT Female |
| AP0250LM-07 | 1A90-6B45 | 0.0625 | 1.000 | 1.880 | 1/4x18 |
| AP0375LM-07 | 1A90-6B45 | 0.0625 | 1.000 | 1.880 | 3/8x18 |
| AP0375LM-10 | 1A90-3A45-6B45 | 0.0625 | 1.000 | 2.250 | 3/8x18 |
| AP0375LM-16 | 1A90-3A45-6B15-6B45 | 0.0625 | 1.000 | 2.630 | 3/8x18 |
| AP0500LM-07 | 1A90-6B45 | 0.0625 | 1.125 | 2.135 | 1/2x14 |
| AP0500LM-10 | 1A90-3A45-6B45 | 0.0625 | 1.125 | 2.750 | 1/2x14 |
| AP0500LM-16 | 1A90-3A45-6B15-6B45 | 0.0625 | 1.125 | 3.250 | 1/2x14 |
| AP0500LM-04 | 1A90-3B45 | 0.2500 | 2.000 | 2.000 | 1/2x14 |
| AP0750LM-07 | 1A90-6B45 | 0.1250 | 1.625 | 2.500 | 3/4x14 |
| AP0750LM-16 | 1A90-3A45-6B15-6B45 | 0.1250 | 1.625 | 3.500 | 3/4x14 |
| AP0750LM-16A0 | 1A90-3A45-6B0-6B45 | 0.2500 | 2.000 | 3.500 | 3/4x14 |
| AP0750LM-16A15 | 1A90-3A45-6B15-6B45 | 0.2500 | 2.000 | 3.500 | 3/4x14 |
Maximum Working Pressure = 10,000psi
