Jet Nozzles > Cnt-r-KUT™ Series
APC EXPANDS THE CNT-R-KUT SERIES WITH THE TOW HOOK CONFIGURATION


Arthur Products Co. (APC) further expands the Cnt-r-KUT™ series with the introduction of the Cnt-r-KUT "TOW HOOK" model. The model allows for 100% of the pressurized water to be applied to the task at hand by the integration of a towing nozzle which can be pulled through the line. Another option for this configuration is the ability to pull a line from point "A" to point "B" if required. Manufactured from the same aerospace elastomer as all the other Cnt-r-KUT models the Cnt-r-KUT "TOW HOOK" is flexible enough to conform to damaged or deformed lines and can easily be trimmed in the field to fit virtually any line from 2" to 8" in diameter. Simply attach your 3/8" or 1/2"npt hose to one end of the Cnt-r-KUT "TOW HOOK" and you are ready to tackle the task at hand.

The Cnt-r-KUT™ "TOW HOOK" is available in both the "Standard" and "Mini" sizes.

CNT-R-KUT™ TOW HOOK
CNT-R-KUT™ TOW HOOK Kit

Cnt-r-KUT™ "TOW HOOK" Kit



  • CNT-R-KUT™ TOW HOOK

    8 Rear Jets for propulsion for line transfer

  • CNT-R-KUT™ TOW HOOK

    8 Side Jets for polishing of pipe walls

  • CNT-R-KUT™ TOW HOOK

    8 Forwards Jets for peeling debris off of pipe walls

Contact Information:
Phone 1: 1.800.322.0510
Phone 2: 1.330.725.4905
Fax: 1.330.722.2698
E-Mail: apc@apclsq.com
Website:: www.arthurproducts.com
Flexible Centering Nozzle
Jet Nozzles
Vent Tubes and Filler Tubes