 |
 |
 |
 |
 |
 |
 |
 |
Jet Nozzles > Nozzles
Heat Treated Stainless Steel Jet Nozzles
| Female Pipe Thread (NPT) | Outside Diameter | Overall Length |
Round Nose - "RN" Style
For Tight Corners or P Traps
 |
| 1/16x27 | .375 | .531 | |
| 1/8x27 | .468 | .687 | |
| 1/4x18 | .625 | .750 | |
| 3/8x18 | .812 | .875 | |
| 1/2x14 | 1.000 | 1.000 | |
| 3/4x14 | 1.250 | 1.375 |
| Female Pipe Thread (NPT) | Hex Dimansions | Overall Length |
Round Nose Hex - RNH 20 to 45 Degree Style
For Penetrating or Flushing
 |
| 1/8x27 | .625 | .750 | |
| 1/4x18 | .750 | .750 | |
| 3/8x18 | .875 | 1.000 | |
| 1/2x14 | 1.000 | 1.000 | |
| 3/4x14 | 1.250 | 1.375 | |
| 1x11.5 | 1.625 | 2.500 |
| Female Pipe Thread (NPT) | Outside Diameter | Overall Length |
"EV" Style
For Side and Back Cutting
 |
| 1/8x27 | .468 | 1.531 | |
| 1/4x18 | .625 | 1.687 | |
| 3/8x18 | .812 | 2.125 | |
| 1/2x14 | 1.000 | 2.250 |
Spin Jet 360 Revolver
| Sizes | Outside Diameter | Overall Length | GPM |
Spin Jets 360 Revolver
For Cutting, Polishing, Cleaning and Flushing
 |
| 1/16" NPT | .375 O.D. | 1.375 O.A.L. | 10 GPM | |
| 1/8" NPT | .500 O.D. | 1.437 O.A.L. | 15 GPM | |
| 1/4" NPT | .660 O.D. | 1.500 O.A.L. | 30 GPM | |
| 3/8" NPT | .937 O.D. | 1.900 O.A.L. | 45 GPM | |
| 1/2" NPT | 1.350 O.D. | 3.700 O.A.L. | 60 GPM | |
| 3/4" NPT | 1.350 O.D. | 3.700 O.A.L. | 60 GPM | |
| 1" NPT | 1.750 O.D. | 4.700 O.A.L. | 80 GPM | |
|
Arthur Products spin Jets are made from High Grade stainless steel and heat treated for longer service life. This nozzle offers a full 360 degree cleaning with forward jets for cutting, side jets for polishing and back jets for cleaning and flushing. Straight forward het is also available. Drilled jets can be put in body for extra pulling power at 45 degrees. All jets spin on sleeve. The sleeves can be custom drilled to your speciification. Easy to install repair kits are available. 1" NPT comes with polishing and pulling/flushing only. |
||||
A & B Type
| Female Pipe Thread (NPT) | Outside Diameter | Overall Length |
"B" or "P" Style
For Pulling or Back Cutting
 |
| 1/16x27 | .375 | 1.000 | |
| 1/8x27 | .468 | 1.250 | |
| 1/4x18 | .625 | 1.250 | |
| 3/8x18 | .812 | 1.500 | |
| 1/2x14 | 1.000 | 1.750 | |
| 3/4x14 | 1.250 | 2.000 |
Insert Line Moles
| Outside Diameter | Overall Length | Female Pipe Thread | Total # of Ports |
APLM-1.00-7
APLM-1.25-7  |
| 1.000 | 1.875 | 3/8-18 | 7 | |
| 1.125 | 2.125 | 1/2-14 | 7 | |
|
Accepts HPF-062 inserts (1/16-27).
Angles of Discharge: One straight forward, 6 back at 45 degrees. |
||||
| Outside Diameter | Overall Length | Female Pipe Thread | Total # of Ports |
APLM-1.00-10
APLM-1.25-10  |
| 1.000 | 2.250 | 3/8-18 | 10 | |
| 1.125 | 2.750 | 1/2-14 | 10 | |
|
Accepts HPF-062 inserts (1/16-27).
Angles of Discharge: One straight forward, 3 forward at 45 degrees, 6 back at 45 degrees. |
||||
| Outside Diameter | Overall Length | Female Pipe Thread | Total # of Ports |
APLM-1.00-16
APLM-1.25-16  |
| 1.000 | 2.625 | 3/8-18 | 16 | |
| 1.125 | 3.250 | 1/2-14 | 16 | |
|
Accepts HPF-062 inserts (1/16-27).
Angles of Discharge: One straight forward, 3 forward at 45 degrees, 6 back at 15 degrees, 6 back at 45 degrees. |
||||
| Outside Diameter | Overall Length | Female Pipe Thread | Total # of Ports |
APLM-1.625-10
APLM-1.625-16  |
| 1.625 | 2.500 | 3/4-14 | 10 | |
| 1.625 | 3.500 | 3/4-14 | 16 | |
|
Accepts HPF-062 inserts (1/16-27).
Angles of Discharge(16 port): One straight forward, 3 forward at 45 degrees, 6 back at 15 degrees, 6 back at 45 degrees. |
||||
| Outside Diameter | Overall Length | Female Pipe Thread | Total # of Ports |
APLM-2.16-10
APLM-2.16  |
| 2.000 | 3.500 | 3/4-14 | 16 | |
| 2.000 | 3.500 | 3/4-14 | 16 | |
|
Angles of Discharge: One straight forward, 3 forward at 45 degrees,
6 back at 15 degrees, 6 back at 45 degrees. |
||||
Mini-Line Moles
| Special Female Thread | Outside Diameter | Overall Length |
Mini Series
Special Tapered Thread
 |
| Mini-250 | .250 | .750 | |
| Mini-312 | .312 | 1.500 | |
Lances
| Part | OD Ins. | ID Ins. | Available Threads | Working Pressure (PSI) |
Rigid Lances
6 inches thru 26 feet. Material: 304 Stainless Steel.
 |
| Mini 200 | .200 | .150 | Special Tapered Thread | 10,000 | |
| Mini 250 | .248 | .170 | Special Tapered Thread | 10,000 | |
| Mini 312 | .312 | .187 | Special Tapered Thread | 10,000 | |
| L-062-OAL | .312 | .187 | 1/16" NPT (M) x 1/16" NPT (M) | 15,000 | |
| L-125-OAL | .406 | .250 | 1/8" NPT (M) x 1/8" NPT (M) | 15,000 | |
| L-250-OAL | .531 | .375 | 1/4" NPT (M) x 1/4" NPT (M) | 15,000 | |
| L-375-OAL | .675 | .423 | 3/8" NPT (M) x 3/8" NPT (M) | 15,000 | |
| L-500-OAL | .840 | .546 | 1/2" NPT (M) x 1/2" NPT (M) | 15,000 | |
| L-750-OAL | 1.050 | .742 | 3/4" NPT (M) x 3/4" NPT (M) | 15,000 | |
| L-1.000-OAL | 1.315 | .957 | 1" NPT (M) x 1" NPT (M) | 15,000 |
When ordering: Select thread size and specify length.